Comments on: C303 cv boot http://www.pearman.cc/blog/tgb13/c303-cv-boot/ Volvo c304 Fri, 06 Jan 2017 19:30:01 +0000 hourly 1 https://wordpress.org/?v=4.2.36 By: admin http://www.pearman.cc/blog/tgb13/c303-cv-boot/#comment-81 Mon, 05 Jan 2015 22:52:14 +0000 http://www.pearman.cc/blog/?p=207#comment-81 Thanks - the breather was blocked and I'm pretty sure the hub was pressurised. I'm thinking it's a mix of water mud and oil. I've mopped up what I can. Was thinking of spraying some degreasant in there. Is there any reason I would not do that?

Likes(0)Dislikes(0)
]]> By: Haf-e http://www.pearman.cc/blog/tgb13/c303-cv-boot/#comment-80 Mon, 05 Jan 2015 17:35:41 +0000 http://www.pearman.cc/blog/?p=207#comment-80 Are you planning on replacing the CV boot while you are in there?

If not - just give it a good cleaning. Hard to say what the crud was - could be just old grease. Mix some of it with gasoline in a container and see what is left at the bottom. Grease will completely dissolve - dirt will precipitate out to the bottom. good for seeing if it was metal too - try a magnet on the remains.

Likes(0)Dislikes(0)
]]>